Industrial Robot

Industrial Robots: Servo Systems Co.
Servo Systems is a full-service motion-control products distributor and robotic systems integrator. We offer an extensive line of premium-quality robotics and automation technology.
www.servosystems.com

Industrial Robots at Techno-Sommer
Find the exact Techno-Sommer Industrial Robots for your application. Free catalogs online and by mail. Download drawings plus get immediate quotes via e-mail.
www.techno-sommer.com

Dispensing Robots XYZ
Dispense Robot $1,995 3 Axes 200mm Sq Area Limited - 29th Feb 2008.
www.ijfisnar.com

ABB Control Products
Authorized ABB control distributor with over 25,000 products online. Starters, contactors, circuit breakers, soft starts, PLC's and replacement parts.
www.pacificcoastbreaker.com

Industrial Robots
Looking For Industrial Robots? Find The Best Deals Online Now.
Findstuff.com

**Punish the Forex** with My 4X Robot
The most sophisticated multi-timeframe "EA" to hit the market place.
www.ForexRobotTrader.com

Gantry Robot Directory
Industrial products and services! Find gantry robot.
www.Industrial101.com

Warning: mkdir() [function.mkdir]: Permission denied in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: mkdir() [function.mkdir]: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 12

Warning: fopen(/home/templatecore2cache//*cluesnet.com/83/83429ef1e949ed4cfd3740742c38e93ea45e881b.tc2cache) [function.fopen]: failed to open stream: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 130

Warning: fwrite(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 131

Warning: fclose(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 132

An industrial robot is officially defined by International Organization for StandardizationISO Standard 8373:1994, Manipulating Industrial Robots – Vocabulary as an automatically controlled, reprogrammable, multipurpose manipulator programmable in three or more axes. The field of robotics may be more practically defined as the study, design and use of robot systems for manufacturing (a top-level definition relying on the prior definition of robot).).

Typical applications of robots include welding, painting, ironing, assembly, wikt:pick and place, packaging and palletizing, product inspection, and testing, all accomplished with high endurance, speed, and precision.

Robot types, features The most commonly used robot configurations are articulated robots, SCARA robots and gantry robots (aka Cartesian Coordinate robots, or x-y-z robots). In the context of general robotics, most types of robots would fall into the category of robot arms (inherent in the use of the word manipulator in the above-mentioned ISO standard).Robots exhibit varying degrees of autonomous robot:

Some robots are programmed to faithfully carry out specific actions over and over again (repetitive actions) without variation and with a high degree of accuracy. These actions are determined by programmed routines that specify the direction, acceleration, velocity, deceleration, and distance of a series of coordinated motions.
Other robots are much more flexible as to the orientation of the object on which they are operating or even the task that has to be performed on the object itself, which the robot may even need to identify. For example, for more precise guidance, robots often contain machine vision sub-systems acting as their "eyes", linked to powerful computers or controllers. Artificial intelligence, or what passes for it, is becoming an increasingly important factor in the modern industrial robot.

History of Industrial Robotics George Devol applied for the first robotics patent in 1954 (granted in 1961). The first company to produce a robot was Unimation, founded by George Devol and Joseph F. Engelberger in 1956, and was based on Devol's original patents. Unimation robots were also called programmable transfer machines since their main use at first was to transfer objects from one point to another, less than a dozen feet or so apart. They used hydraulic actuators and were programmed in joint coordinates, i.e. the angles of the various joints were stored during a teaching phase and replayed in operation. They were accurate to within 1/10,000 of an inch. Unimation later licensed their technology to Kawasaki Heavy Industries and Guest-Nettlefolds, manufacturing Unimates in Japan and England respectively. For some time Unimation's only competitor was Cincinnati Milacron Inc. of Ohio. This changed radically in the late 1970s when several big Japanese conglomerates began producing similar industrial robots.

In 1969 Victor Scheinman at Stanford University invented the Stanford arm, an all-electric, 6-axis articulated robot designed to permit an arm solution. This allowed it to accurately follow arbitrary paths in space and widened the potential use of the robot to more sophisticated applications such as assembly and welding. Scheinman then designed a second arm for the MIT AI Lab, called the "MIT arm." Scheinman, after receiving a fellowship from Unimation to develop his designs, sold those designs to Unimation who further developed them with support from General Motors Corporation and later marketed it as the Programmable Universal Machine for Assembly (PUMA).

In 1973 KUKA built its first robot, known as FAMULUS, this is the first articulated robot to have six electromechanically driven robotic axe.

Interest in robotics wikt:swelled in the late 1970s and many companies entered the field, including large firms like General Electric, and General Motors (which formed joint venture FANUC Robotics with FANUC LTD of Japan). US start-ups included Automatix and Adept Technology, Inc. At the height of the robot boom in 1984, Unimation was acquired by Westinghouse Electric Corporation for 107 million US dollars. Westinghouse sold Unimation to Stäubli Faverges SCA of France in 1988. Stäubli was still making articulated robots for general industrial and clean room applications as of 2004 and even bought the robotic division of Robert Bosch GmbH in late 2004.

Eventually the myopic vision of American industry was superseded by the financial resources and strong domestic market enjoyed by the Japanese manufacturers. Only a few non-Japanese companies managed to survive in this market, including Adept Technology, Stäubli-Unimation, the Sweden-Switzerland company Asea Brown Boveri (ASEA Brown-Boveri), the Austrian manufacturer igm Robotersysteme AG and the Germany company KUKA.

Technical description Defining parameters

Number of axes – two axes are required to reach any point in a plane; three axes are required to reach any point in space. To fully control the orientation of the end of the arm (i.e. the wrist) three more axes (roll, pitch and yaw) are required. Some designs (e.g. the SCARA robot) trade limitations in motion possibilities for cost, speed, and accuracy.
Degrees of freedom (engineering) which is usually the same as the number of axes.
Working envelope – the region of space a robot can reach.
robot kinematics – the actual arrangement of rigid members and joints in the robot, which determines the robot's possible motions. Classes of robot kinematics include Articulated robot, Cartesian coordinate robot, Parallel robot and SCARA robot.
Carrying capacity or payload – how much weight a robot can lift.
Speed – how fast the robot can position the end of its arm. This may be defined in terms of the angular or linear speed of each axis or as a compound speed i.e. the speed of the end of the arm when all axes are moving.
Acceleration - how quickly an axis can accelerate. Since this is a limiting factor a robot may not be able to reach it's specified maximum speed for movements over a short distance or a complex path requiring frequent changes of direction.
Accuracy – how closely a robot can reach a commanded position. Accuracy can vary with speed and position within the working envelope and with payload (see compliance). It can be improved by Robot calibration.
Repeatability - how well the robot will return to a programmed position. This is not the same as accuracy. It may be that when told to go to a certain X-Y-Z position that it gets only to within 1mm of that position. This would be it's accuracy which may be improved by calibration. But if that position is taught into controller memory and each time it is sent there it returns to within 0.1mm of the taught position then the repeatability will be within 0.1mm.
Motion control – for some applications, such as simple pick-and-place assembly, the robot need merely return repeatably to a limited number of pre-taught positions. For more sophisticated applications, such as arc welding, motion must be continuously controlled to follow a path in space, with controlled orientation and velocity.
Power source – some robots use electric motors, others use hydraulic actuators. The former are faster, the latter are stronger and advantageous in applications such as spray painting, where a spark could set off an explosion.
Drive – some robots connect electric motors to the joints via gears; others connect the motor to the joint directly (direct drive). Using gears results in measurable 'backlash' which is free movement in an axis. In smaller robot arms with DC electric motors, because DC motors are high speed low torque motors they frequently require high ratios so that backlash is a problem. In such cases the harmonic drive is often used.
Compliance - this is a measure of the amount in angle or distance that a robot axis will move when a force is applied to it. Because of compliance when a robot goes to a position carrying it's maximum payload it will be at a position slightly lower than when it is carrying no payload. Compliance can also be responsible for overshoot when carrying high payloads in which case acceleration would need to be reduced.

Robot programming and interfaces

The setup or programming of motions and sequences for an industrial robot is typically taught by linking the robot controller to a laptop, desktop computer or (internal or Internet) computer network.

Software: The computer is installed with corresponding Interface (computer science) software. The use of a computer greatly simplifies the programming process. Specialized robot software is run either in the robot controller or in the computer or both depending on the system design.

Teach Pendant: Robots can also be taught via teach pendant, a handheld control and programming unit. The common feature of such units are the ability to manually send the robot to a desired position, or inch or jog to adjust a position. They also have a means to change the speed since a low speed is usually required for careful positioning. A large emergency stop button is usually included as well. Typically once the robot has been programmed there is no more use for the teach pendant.

Lead-by-the-nose is a technique offered by most robot manufacturers but is of dubious value. While user holds the robot end effector another person enters a command which de-energizes the robot and it goes limp. The user then moves the robot by hand to the required positions or along a required path while the software logs these positions into memory. The program can later run the robot to these positions or along the taught path. This technique was popular for tasks such as spray painting.

Others In addition, machine operators often use User Interface devices, typically touch screen units, which serve as the operator control panel. The operator can switch from program to program, make adjustments within a program and also operate a host of peripheral devices that may be integrated within the same robotic system. These include end effectors, feeders that supply components to the robot, conveyor belt, emergency stop controls, machine vision systems, safety interlock (engineering) systems, bar code printers and an almost infinite array of other industrial devices which are accessed and controlled via the operator control panel.

The teach pendant or PC is usually disconnected after programming and the robot then runs on the program that has been installed in its controller. However a computer is often used to 'supervise' the robot and any peripherals.

A robot and a collection of machines or peripherals is referred to as a workcell, or cell. A typical cell might contain a parts feeder, a injection molding machine and a robot. The various machines are 'integrated' and controlled by a single computer or Programmable logic controller.

End Effectors The most essential robot peripheral is the end effector without which the robot cannot do anything. Obvious examples are grippers which are devices that can grasp an object, usually electromechanics or pneumatic. Another common means of picking up an object is by vacuum. End effectors are frequently highly complex, made to match the handled product and often capable of picking up an array of the products at one time.

Movement and singularities Most articulated robots perform by storing a series of positions in memory, and moving to them at various times in their programming sequence. For example, a robot which is moving items from one place to another might have a simple 'pick and place' program similar to the following:

Define points P1–P5:

Safely above workpiece (defined as P1)

10 cm Above bin A (defined as P2)

At position to take part from bin A (defined as P3)

10 cm Above bin B (defined as P4)

At position to take part from bin B. (defined as p5)

Define program:

Move to P1

Move to P2

Move to P3

Close gripper

Move to P4

Move to P5

Open gripper

Move to P1 and finish

For a given robot the only parameters necessary to locate the end effector (gripper, welding torch, etc.) of the robot completely are the angles of each of the joints or displacements of the linear axes (or combinations of the two for robot formats such as SCARA). However there are many different ways to define the points. The most common and most convenient way of defining a point is to specify a Cartesian coordinate for it, i.e. the position of the 'end effector' in mm in the X, Y and Z directions. In addition the angles of the end effector in pitch, roll and yaw and the length of the tool must also be specified, depending on the types of joints a particular robot may have. For a jointed arm these coordinates must be converted to joint angles by the robot controller and such conversions are known as Cartesian Transformations which may need to be performed iteratively or recursively for a multiple axis robot. The mathematics of the relationship between joint angles and actual spatial coordinates is called kinematics. See robot control

Positioning by Cartesian coordinates may be done by entering the coordinates into the system or by using a teach pendant which moves the robot in X-Y-Z directions. It is much easier for a human operator to visualize motions up/down, left right etc. than to move each joint one at a time. When the desired position is reached it is then defined in some way peculiar to the robot software in use, e.g. P1 - P5 above.

Recent and future developments As of 2005, the robotic arm business is approaching a mature state, where they can provide enough speed, accuracy and ease of use for most of the applications. Vision guidance (aka machine vision) is bringing a lot of flexibility to robotic cells. So we have the arm and the eye, but the part that still has poor flexibility is the hand: the end effector attached to a robot is often a simple pneumatic, 2-position wrench. This doesn't allow the robotic cell to easily handle different parts, in different orientations.

Hand-in-hand with increasing off-line programmed applications, robot calibration is becoming more and more important in order to guarantee a good positioning accuracy.

Other developments include downsizing industrial arms for consumer applications (micro-robotic arms), manufacture of domestic robots and using industrial arms in combination with more intelligent Automated Guided Vehicles (AGVs) to make the Logistics automation more flexible between pick-up and drop-off.

Prices of robots will vary with the features, but are usually from 12,000 USD for an wikt:entry-level model, and as much as 100,000 or more for a wikt:heavy-duty, long reach robot.

Robot Manufacturers

Asea Brown Boveri
Adept Technology
Cloos GmbH
Comau
denso
Epson Robots
FANUC Robotics
Fuji Yusoki Robotics
HYUNDAI Robotics
igm Robotersysteme
Intellibot Robotics LLC
Intelligent Actuator
Intelitek (was Eshed)

Janome
Kawasaki Heavy Industries
KUKA
Nachi
Nidec Sankyo
Daihen
Panasonic
Reis
Stäubli
ST Robotics
toshiba
Yamaha Motor Company
Motoman

Notes

See also References

Nof, Shimon Y. (editor) (1999). Handbook of Industrial Robotics, 2nd ed. John Wiley & Sons. 1378 pp. ISBN 0-471-17783-0.
A comprehensive reference on the categories and applications of industrial robotics.

External links

Industrial robots and robot system safety (by OSHA, so in the public domain).
Robotic Industries Association.

Industrial Robot Language from FOLDOC
Industrial Robot Language < language, robotics > (IRL) A high-level language for programming industrial robots. ["IRL, Industrial Robot Language", DIN 66312, Beuth-Verlag 1992].

Industrial Robot an International Journal Online

Industrial Robot

Industrial Robots and Robotic Automation System Sales
A turnkey integrator of new and used robots and robotic systems for industrial automation.

Industrial Robots
Find quality industrial robots at RobotWorx - Motoman, Fanuc, Panasonic, ABB, Nachi and others with warranty!

Industrial robot - Wikipedia, the free encyclopedia
An industrial robot is officially defined by ISO [1] as an automatically controlled, reprogrammable, multipurpose manipulator programmable in three or more axes.

Smart movers - robots - 15 January 2000 - New Scientist Tech
The car maker DaimlerChrysler has introduced industrial robots with brains that evolve. A programmer normally has to devote several days of meticulous

Stäubli - Textile Machinery, Connectors and Robotics. Textile ...
Switzerland. Features this manufacturer of industrial and cleanroom robots, high speed textile machineries, and quick release couplings.

Industrial Robot

Category:Industrial robots - Wikimedia Commons
Media in category "Industrial robots" The following 4 files are in this category, out of 4 total.